11-28-2010, 03:14 AM
A simulator is a program run on a computer for the purpose of simulating some sort of system, in order to get
a better idea how the system functions. Simulator is often used to test new software on a wide range of
hardware configurations, without actually having to use the physical computer resources. At its most
fundamental level, a computer simulator is used to recreate a real-life situation where testing many different
states wouldn’t be easy or safe. In this case, using a computer simulator saves a great deal of time and
resources, and may actually allow for in-depth testing that would be physically impossible or at least difficult
in the real world.
RAID, an acronym for redundant array of independent disks or redundant array of inexpensive disks, is a
technology that provides increased storage reliability through redundancy, combining multiple low-cost, lessreliable
disk drives components into a logical unit where all drives in the array are interdependent.
Main Features:
Graphic representation of each step
Show all the disks.
Show Partition of the disks
All RAID Levels (Level 0, 1, 2, 5 etc) simulation
Description of each volume i.e. Capacity, Type, Free Space,
Features of each level i.e. striping, Mirroring, Stripe Set with Parity etc
Control the generation of simulation objects
Save the State of Array.
Logical Formation of any RAID Volume.
Application Type:
Desktop Application
Tools:
Front End tool: Dot net
Back End Database: SQL Server
Note: These are the least requirements which must be fulfilled for the approval of project. More features can
be included according to the supervisor’s instructions in future too.
a better idea how the system functions. Simulator is often used to test new software on a wide range of
hardware configurations, without actually having to use the physical computer resources. At its most
fundamental level, a computer simulator is used to recreate a real-life situation where testing many different
states wouldn’t be easy or safe. In this case, using a computer simulator saves a great deal of time and
resources, and may actually allow for in-depth testing that would be physically impossible or at least difficult
in the real world.
RAID, an acronym for redundant array of independent disks or redundant array of inexpensive disks, is a
technology that provides increased storage reliability through redundancy, combining multiple low-cost, lessreliable
disk drives components into a logical unit where all drives in the array are interdependent.
Main Features:
Graphic representation of each step
Show all the disks.
Show Partition of the disks
All RAID Levels (Level 0, 1, 2, 5 etc) simulation
Description of each volume i.e. Capacity, Type, Free Space,
Features of each level i.e. striping, Mirroring, Stripe Set with Parity etc
Control the generation of simulation objects
Save the State of Array.
Logical Formation of any RAID Volume.
Application Type:
Desktop Application
Tools:
Front End tool: Dot net
Back End Database: SQL Server
Note: These are the least requirements which must be fulfilled for the approval of project. More features can
be included according to the supervisor’s instructions in future too.